Carrier Bearing Assembly, Series 1710 CR00-67121

Part Dimensions:

• 9 1/4 inches (assembly)
• 2 1/4 inches (assembly)
• 6 5/16 inches (assembly)
• Center 2 25/32 inches (bearing)
• Inside Diameter: 50mm (bearing)
• Qty Per Vehicle: 1

Misc. Specs:

• Bolt Holes: 7 5/8 inches Center-to-Center
• Bolt Size: 1/2 inch
• Notes: Remove & do not reinstall the OE dust shield. Reusing the OE shield can cause noise & installation issues. Thoroughly clean all mating surfaces prior to reassembly.
  Hand tighten bolts to hold carrier bearing in place prior to torqueing to manufacturers specifications (varies by application).

Check Out All Our Engine Components!